Steam & Hot Water Products

altTo help you improve hot water and steam distribution at exact temperature and pressure while keeping energy use in check, Trouvay & Cauvin Group provides comprehensive steam and hot water systems design, supply, installation and surveys.

We carry a wide range of products from the world's leading manufacturers including all types of steam traps, air vents, drain traps, manifolds, valves etc.

alt

 

One of our premium partners is Armstrong International, a world leader in steam, humidification and hot water products and energy management. Trouvay & Cauvin is the sole distributor of Armstrong full range of products for Oil & Gas and Institutional markets in Qatar, U.A.E, Saudi Arabia, Oman and Kuwait.

 

Our water heating solutions for institutional and industrial systems cover the entire hot water system, including generation, distribution and controls.

Steam, condensate and hot water system audits are also available as part of Energy Audit solutions.

Steam

Steam Traps

Products

  • 5 years warrented SS Inverted Bucket type (up to 28 bar)
  • Float & Thermostatic type
  • Control disc
  • Bimetalic
  • Thermostatic wafer type
  • Thermostatic bellow type
  • Fully equipped Trap Valve Station (TVS)

Specifications

  • Pressure from 0,1 bar to 124 bar saturated & superheated
  • Temperature up to 565 ° C
  • From 1/2" to 3" connection FLANGED / SW / Screwed / NPT / BSPT
  • Carbon steel / Forged steel / Stainless steel / ...
  • Condensate load up to 127,000 kg/hr

End use

  • Refiney
  • Petrochemical plants
  • Chemical plants
  • Hospitals
  • Food industry

Steam Tracing

Products

  • Double sealed valves
  • Manifold for steam distribution
  • Manifold for condensate collection

Specifications

  • Complete trap valve station in Forged steel with inlet / outlet / blow down / test valves
  • Steam distribution and condensate return manifold in forged steel, up to 400 ° C / 32 bar

End use

  • Refiney ; Petrochemical plants
  • Chemical plants ; Hospitals
  • Food industry

Condensate Recovery Equipment

Products

  • Mechanical pumping trap and packages
  • Flash recovery vessels
  • Stainless steel sump ejectors

Specifications

  • Mechanical pump steam operated or neutral gas operated (air / nitrogen) in fabricated steel P265GH / P275H
  • Connection from 1" to 3" FLANGED
  • Flash tank to convert high pressure condensate into low pressure steam

End use

  • Refiney ; Petrochemical plants
  • Chemical plants ; Hospitals
  • Food industry

Pressure & Temperature Control

Products

  • Pressure Reducing Valves
  • Cyclone separators
  • Temperature regulators
  • Control valves

Specifications

  • Stainless steel / Ductile iron
  • Direct acting / Diaphragm operated / External pilot
  • Pressure up to 20 bar & Temperature up to 232 ° C

End use

  • Process application steam network

Water Heating

Products

  • Instantaneous water heaters
  • Shell & tube heat exchangers
  • Clean In Place scale removal system

Specifications

  • Instantaneous steam powered water heaters
  • Water temperature mixing unit
  • Complete system Gas fired water heater

End use

  • Food industry ; Hospitals ; Hotels

Air Vents

Products

  • Float type
  • Thermostatic type

Specifications

  • To remove gases from liquid or non condensible gases from steam
  • Forged Steel / Stainless Steel 304L
  • Connection from 1/8" to 2" Screwed / SW / Flanged
  • Pressure up to 255 bar & Temperature up to 482  ° C

End use

  • Any liquid line & steam line

Liquid Drainers

Products

  • Float type

Specifications

  • To remove heavy liquids from gases or heavy liquids from light liquids
  • Forged Steel / Stainless Steel 304L / Cast Steel
  • Connection from 1/2" to 2"
  • Pressure up to 255 bar & Temperature up to 482  ° C
  • Maximum drain capacity = 318,000 kg/hr

End use

  • Any compressed air system
  • Tank farm

Humidification

Products

  • Direct steam injection
  • Electronic
  • Steam-to-steam
  • Fogging

Specifications

  • Dispersion tube T304 Stainless Steel

End use

  • Hospitals ; Clean rooms ; Pharmaceutical
  • Museums ; Laboratories ; Printing

 
Hot Water

Water heaters

Flo rite temp instantaneous water heater

Flo eco

Flo direct

Heat Exchanger (tube and plate)

DIGITAL FLO

Specifications :

  • Heat Exchanger / digital controller (digital water temperature control technology + instantaneous heat exchanger design)
  • A “plug and play” hot water solution
  • Energy savings and legionella risk reduction

End use :

  • Steam/hot water installations (…)

Thermostatic and Digital Mixing Valves

THE BRAIN (DRV80)

Specifications :

  • DRV80 is a fully digital recirculation valve (DRV) for “point of source” or mechanical room based installation. DRV80 is designed specifically to be the primary water temperature controller in a continuously pumped recirculating hot water system.
    • Accurate control of blended water drawn from the system at a point of use typically within +/-2°F at draw off points a minimum of 5m downstream of mixing valve during consistent system demand periods
    • Operational water pressure of 10 -150 psig
    • Minimum valve inlet to outlet temperature requirement (system recirculation temperature loss) of 2°F
    • Automatic shutoff of hot water flow upon cold water inlet supply failure
    • Automatic shutoff of hot water flow in the event of a power failure
    • Maintain a consistent system “idling” temperature and control Temperature Creep without the use of a manual throttling device or balance valve.
    • System shall not require a temperature activated pump shut-off device (aquastat).
    • Programmable set point range of 81-158°F (29-71°C)
    • Ability to thermally disinfect at recommended temperatures
    • Programmable 1st level hi/lo temp alarm display
    • Programmable temperature error level for safety shutdown

End use :

  • Mechanical room based installation/recirculating hot water system

HORNE TMV (Thermostatic Mixing Valves)

Products :

  • sizes ranging from DN15 to DN50

Specifications :

  • Used to kill germs by raising the temperature to 60° while control ling the temperatures of circulating hot water and at the point of use (to prevent scalding).

End use :

  • Domestic hot water systems

RADA SENSE

Products :

  • Sense™ DMV-1 for Lavatory
  • Sense™ DMV-2 for Individual Shower
  • Sense™ DMV-3 for Individual Bath
  • Sense™ DMV-23 for Combination Bath and Shower

Specifications :

  • Digital user control of water temperature and flow.
  • A series of 4 individual point of use digital mixing valves designed for installation at the point of use.

End use :

  • Individual lavatory, individual shower, individual bath fill and individual bath/shower
  • In healthcare installations where user safety and legionella risk reduction is paramount.

RADA MIXING VALVES / Water Temperature Control

Products :

  • Rada 320
  • Rada 320D
  • Rada 320-FMC
  • Rada 425
  • Rada 425D
  • Rada 425-FMC
  • Rada 40
  • Rada 40-FMC
  • Rada 50
  • Rada 50-FMC

Specifications :

  • Rada Thermostatic Mixing Valve of “sealed for life” disposable cartridge construction. Complete operating mechanism of valve is enclosed in a durable polymer cartridge for ease of field maintenance. Powerful internal mechanism and non metallic wetted parts resist mineral deposition. Capable of close temperature control at diverse flow rates between 1 gpm (3.8 lpm) 24 gpm (91 lpm).  Able to blend within 5°F (2°C) of either inlet supply due to “low seepage” across internal proportioning mechanism.
    • Dual thermostatic elements provide redundancy in the event of individual thermostat failure
    • Typical outlet temperature control +/-2°F
    • Adjustable maximum temperature limit stop
    • Adjustable single temperature lockout
    • Thermal shutdown mode upon inlet supply failure

End use :

  • recessed enclosure, plumbing chase and utility/mechanical room installation
  • zoned or group control applications